Adding or replacing memory modules
Tools you need to complete this task:
The M675 notebook uses memory modules called SO-DIMMs (Small Outline Dual Inline
Memory Modules). The modules are available in various capacities and any module can
be placed in the memory bay.
Important
To add or replace memory modules:
1
Follow the instructions under
2
Disconnect the AC adapter and modem and network cables, then prepare the
notebook by following the instructions in
3
Turn the notebook over so the bottom is facing up.
4
Remove the battery by following the instructions in
page
7.
26
Phillips #0 screwdriver
Use only memory modules designed for the Gateway M675.
"Preventing static electricity discharge" on page
www.gateway.com
"Preparing the notebook" on page
"Removing the battery" on
Memory
bay
5.
6.