Gateway M675 Service Manual page 48

15
Remove the six screws that secure the LCD panel to the notebook.
16
Lift the LCD panel assembly away from the notebook. The LCD panel assembly is
now completely detached from the notebook.
Caution
17
Place the new LCD panel assembly onto the notebook, then replace the six screws
that secure the LCD panel to the notebook. Make sure to reattach the grounding cable
to the appropriate screw.
18
Plug the LCD video cable into the notebook.
Caution
19
Secure the LCD video connector to the notebook with two screws.
20
Position the antenna cables, channeling them through the palm rest assembly to the
mini-PCI card. Reattach the black antenna cable to the connector labelled MAIN or
M, then reattach the light gray antenna cable to the connector labelled AUX or A.
21
Replace the hinge covers.
22
Reassemble the notebook.
Screws
The IEEE 802.11 connectors may catch on the EMI shielding. Be
careful not to break off the connectors on the antenna cable.
The connector is fragile.
www.gateway.com
43