Mandatory Rpm Programming - Avital AviStart 6500 Installation Manual

Remote engine starter & vehicle security system

Hide thumbs Also See for AviStart 6500:

Table of Contents

Mandatory RPM Programming

In order to remote start the vehicle engine and prevent over-grinding of the

starter motor, the engine RPM must be programmed into the system memory.

1. Start the engine with the ignition key. Let the engine warm up until it

reaches a normal idle RPM (typically 700-900 RPM).

2. Turn the ignition key "OFF."

3. Start the engine with the ignition key.

4. Within 10 seconds of starting the vehicle, begin flicking the valet switch

on then off 15 times (counting the siren chirps).

NOTE: Stop on the 15th chirp. See the "Programming Table for System

Features" on page 24.

5. Press and hold the remote START button.

6. The parking lights will flash two times to confirm the RPMs have been

memorized.

7. Release the START button.

8. Turn the engine off.

AviStart 6500 Installation Manual

Table of Contents