Programming Table For Remote Controls - Avital AviStart 6500 Installation Manual

Programming Table for Remote Controls

Feature
Arm/Disarm
Remote Controlled Trunk
Release Output
Remote Start
Silent Arm/Disarm
Remote-Controlled Valet
Channel 6
Remote-Controlled
Accessory Output
Remote-Controlled
Sensor Bypass
Temperature-Controlled
Start Active/Inactive
Channel 9
Remote-Controlled
Accessory Output
One-Step Remote Code
Learning
Instant Remote Control
Code Deletion
AviStart 6500 Installation Manual
No. of
Factory Setting
Chirps
ARM/DISARM
21
Button
TRUNK Button 22
START Button 23
SILENT Button 24
ARM/DISARM +
25
START Buttons
ARM/DISARM +
26
SILENT Buttons
TRUNK + SILENT
27
Buttons
TRUNK + START
28
Buttons
SILENT + START
29
Buttons
ARM/DISARM
30
Button
— 31
Secondary Action
Press ARM/DISARM Button, the siren
will chirp 1 time.
Press TRUNK Button, the siren will
chirp 2 times.
Press START Button, the siren will
chirp 3 times
Press SILENT Button, the sir.en will
chirp 4 times.
Press ARM/DISARM + START
Buttons, the siren will chirp 5 times.
Press ARM/DISARM + SILENT
Buttons, the siren will chirp 6 times
Press TRUNK + SILENT Buttons, the
.siren will chirp 7 times.
Press TRUNK + START Buttons, the
siren will chirp 8 times.
Press SILENT + START Buttons, the
siren will chirp 9 times.
Press ARM/DISARM Button, the siren
will chirp 1 time.
Wait 3 seconds, the siren will chirp
twice, all codes are erased
out of memory.
25