2 - 36 MC3000 Integrator Guide
NOTE Every mobile computer should have a unique device name. Never try to synchronize more than one mobile
computer to the same name.
Connect the device to the host computer. See
11.
or see
Figure 2-19 on page 2-19
NOTE The cradle requires a dedicated port. It cannot share a USB port with any other device. Refer to the computer
user manual supplied to locate the USB(s).
Upon connection, synchronization occurs automatically.
12.
Cradle/Cable Setup
To use ActiveSync with a cradle or a MC3000 Communication/Charge cable, see Setting Up a Serial Connection
on the Mobile Computer (Windows CE 5.0) on page 2-32 and USB Connection Setup on page 2-34 for
communication setup procedures.
Figure 2-1 on page 2-3
for cable connections.
to set up a Single Slot Serial/USB cradle,