Mobile Computer Startup; Install Main Battery - Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual

1 - 6 MC3000 Integrator Guide

Mobile Computer Startup

To start using the mobile computer:
•
Install the main battery.
•
Charge the main battery and the backup battery.
•
Start the mobile computer.

Install Main Battery

If the main battery is charged, the mobile computer can be used immediately. If the main battery is not charged,
see Battery Charging on page 1-8. To remove the main battery, see Main Battery Removal on page 1-13.
To install the main battery:
Rotate the latches to the open position.
1.
CAUTION Do not lift up on the Latches when removing the Strap/Door Assembly. Lift up on the Hand Strap only.
Pull on the strap to lift the Strap/Door Assembly off, bottom first.
2.
CAUTION On the MC3090G battery, do not remove the battery pull tab. The pull tab is for enabling easy battery
removal from the device.
Insert the battery into the slot, bottom first and press the battery gently into the slot. The battery clip locks the
3.
battery into place.
With the latches in the open position, replace the Strap/Door Assembly, top first and press to close.
4.
Rotate the latches (to the lock position) to lock the Strap/Door Assembly in place.
5.