2 - 20 MC3000 Integrator Guide
Universal Battery Charger (UBC) Adapter
CAUTION
Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 8-1.
The UBC Adapter can be used with a power supply as a standalone spare battery charger or it can be used with
the four station UBC2000 to simultaneously charge up to four spare batteries. For additional information on the
UBC 2000, refer to the UBC 2000 Quick Reference Guide, p/n 70-33188-xx.
CAUTION
Use only a Motorola approved power supply output rated 15 VDC and minimum 1.5 A. Use of an
alternative power supply will void the product warranty and may cause product damage. See the
MC3000 User Guide for the power supply regulatory compliance statement.
Setup
Connect the UBC Adapter to a Motorola approved power source.
AC Line Cord
UBC Adapter Setup
Figure 2-20
Spare Battery Charging
To charge spare batteries:
Insert the spare battery into the spare battery charging slot, bottom first.
1.
Pivot the top of the battery down onto the contact pins.
2.
Power Port
DC Cable
Power Supply