Rd Client Version 3.28 And Above; Bar Code Scanning - Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual

7 - 4 MC3000 Integrator Guide
A new Wireless profile is created on the mobile computer from the data encoded in the bar code(s)
a.
scanned. See
The designated package(s) are downloaded from the FTP server.
b.

RD Client Version 3.28 and above

The RD Client version 3.28 and above enables simple and rapid provisioning of new (out of the box) mobile
computers and simplifies the out-of-box provisioning by scanning bar codes or connecting to a profile server. The
RD Client acts as a frontend for wireless radio configuration, automating the manual configurations that would
normally be required to use these tools.
NOTE The MSP 3.X Rapid Deployment Client enables staging by scanning staging profiles encoded into staging bar
code sheets. It also enables staging to be performed without scanning bar codes through the use of
On-Demand Staging.
When using On-Demand Staging, the RD Client pulls staging profiles directly from an On-Demand Profile
Server over some form of pre-configured or automatically-configured IP connection.
For detailed information about the MSP 3.X, refer to the Mobility Services Platform 3.X User's Guide.
An MSP Administrator uses the MSP Console for the creation of an RD profile that contains all the wireless
network and security information (for example, ESSID, WEP Keys, etc.) required to get a mobile computer onto the
wireless network. The profile also contains FTP server access information needed to connect to the provisioning
MSP and the list of software packages to be provisioned to the mobile computer from the provisioning MSP. The
RD profile can then be encoded into an RD bar code sheet and printed from the MSP Console or loaded onto a
profile server.
RD Bar Code Printout Sample
Figure 7-5

Bar Code Scanning

The
Rapid Deployment
application.
To access the
Rapid Deployment
The
Rapid Deployment
application.
NOTE Use only a scanner connected to the serial port when scanning bar codes using the RD Client.
To access the
Rapid Deployment
Obtain the appropriate RD bar code sheet from the MSP Administrator.
1.
Chapter 6, Wireless Applications
window displays bar code scan status and provides features for resetting and exiting the
window tap
window displays bar code scan status and provides features for resetting and exiting the
window:
for more information about wireless profiles.
> >
Programs Rapid Deployment Client
.