Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual page 104

Mc3000 series integration guide
Hide thumbs Also See for MC3000R - Win CE 5.0 Core 312 MHz:
Table of Contents

Advertisement

4 - 20 MC3000 Integrator Guide
Downloading:
Platform
via Serial Port 115200
Error # -2: Messages:
Cancelled by user
Press any key to continue
IPL Error Screen
Figure 4-15
This error message screen displays until a key is pressed. Once the screen is acknowledged, IPL returns to the
Initial Program Loader
To find the probable cause of the error, use the error number and/or the error text displayed on the screen to look
up the error in
Table
IPL Errors
Table 4-6
Error Text
Unknown error
Cancelled by user
Can't open the source
Can't open the
destination
Can't read from the
source device
Can't write to the
destination device
Transmission
checksum error
Readback checksum
error
main menu to wait for a new selection.
4-6.
Error
Number
-1
A general error occurred. Retry the download. If the failure persists, it is most
likely due to a hardware failure; the mobile computer requires servicing.
-2
The user cancelled the download.
-7
An error occurred opening the source device (either radio card or serial port).
Check source device connectivity and retry.
-8
An error occurred opening the destination device (either flash ROM or Power
Micro). Retry the download. If the failure persists, it is most likely due to a
hardware failure; the mobile computer requires servicing.
-9
The source device (either radio card or serial port) could not be read from.
Check source device connectivity and retry.
-10
The destination device (either flash ROM or Power Micro) could not be
written to. Retry the download. If the failure persists, it is most likely due to a
hardware failure; the mobile computer requires servicing.
-11
An error occurred during transmission from the source device (either radio
card or serial port) and the checksum check failed. Check source device
connectivity and retry.
-12
A checksum, generated from reading back data that was written to the
destination device, was incorrect. An error during transmission or a write
error to the destination device could cause this.
Probable Cause

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mc3090gMc3090sMc3090r

Table of Contents