Known Aps Window - Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual

6 - 36 MC3000 Integrator Guide

Known APs Window

The window displays the APs in range using the same ESSID as the mobile computer. This window
Known APs
only available when in the
To open the
Known APs
displays.
Known APs Window
Figure 6-44
The icon next to the AP indicates:
Tapping and holding the stylus on a specific AP displays a context sensitive menu with the options:
and .
Set Roaming
Selecting the
Set Mandatory
displays on top of the icon when the
selected AP and never roams until:
•
Set Roaming
• The mobile computer roams to a new profile
• The mobile computer is suspended
• The mobile computer resets (warm or cold).
Selecting
Set Roaming
temporary and never saved to the registry.
Tap to update the list of the APs with the same ESSID. A signal strength value of 32 is the highest
Refresh
possible.
mode.
Infrastructure
window, tap
Known APs
The AP is the currently associated access point, and it is set to mandatory.
The AP is the currently associated access point, but it is not set to mandatory.
The mobile computer is not currently associated to this AP, but the AP is set as
mandatory.
The mobile computer is not currently associated to this AP, and AP is not set as
mandatory.
option prohibits the mobile computer from associating with a different AP. The letter
Set Mandatory
is chosen
allows the mobile computer to roam to any AP with a better signal. These settings are
in the
Wireless Diagnostics
option is selected. The mobile computer connects to the
window. The window
Known APs
Set Mandatory
M