Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual page 197

Table 8-1 Troubleshooting the Mobile Computer (Continued)
Problem
During data Mobile computer
communication, no removed from
data was transmitted, cradle or unplugged
or transmitted data from host computer
was incomplete. during
communication.
Incorrect cable
configuration.
Communication
software was
incorrectly installed
or configured.
Mobile computer does Volume setting is
not emit sound. low or turned off.
Mobile computer turns Mobile computer is
itself off. inactive.
Battery is depleted.
Battery is not
inserted properly.
Tapping the window Touch screen not
buttons or icons does calibrated correctly.
not activate the
corresponding
The system
feature.
crashed.
A message appears Too many files
stating that the mobile stored on the
computer memory is mobile computer.
full.
Too many
applications
installed on the
mobile computer.
Cause
Replace the mobile computer in the cradle, or reattach the cable and
re-transmit.
See Chapter 2, Accessories
Perform communication setup as described in Communication
Setup on page 2-30.
Mobile computer may be a beeper only configuration or incorrect
setting is programmed into device.
The mobile computer turns off after a period of inactivity. This period
can be set from one to five minutes, in one-minute intervals.
Recharge or replace the battery.
Insert the battery properly. For more information see, Install Main
Battery on page 1-6.
Re-calibrate the screen.
From the mobile computer,
icon and double-tap on
Warm boot the system. To perform a warm boot, see Resetting the
Mobile Computer on page 1-11.
Delete unused memos and records. If necessary, save these
records on the host computer.
Remove unused installed applications from the mobile computer to
recover memory.
Maintenance & Troubleshooting
Solution
for cable configurations.
double-tap the
Demo window
. Follow the screen prompts.
Touch Calibrate
8 - 3
Ctl Panel