Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual page 148

6 - 26 MC3000 Integrator Guide
Profile Icons
Table 6-19
Icon
No Icon Profile is not selected, but enabled.
Profile is disabled.
Profile is Cancelled. A Cancelled profile is disabled until a connect or login function is performed through
the configuration editor.
Profile is currently in use and describes an infrastructure profile not using encryption.
Profile is currently in use and describes an infrastructure profile using encryption.
Profile is currently in use and describes an ad-hoc profile not using encryption.
Profile is currently in use and describes an ad-hoc profile using encryption.
Profile is not valid in the device current operating regulatory domain.
The profiles are listed in priority order for use by the automatic roaming feature. Change the order by moving
profiles up or down. Edit existing profiles by selecting one in the list and then tap-and-hold to display the menu. The
menu allows the selected profile to be connected, edited, disabled (enabled) or deleted. (Note: the
item changes to
Enable
A dialog displays to confirm the users desire to delete a profile, if selected.
Changing Profiles
A completed profile is a set of configuration settings that can be used in different locations to connect to a wireless
network. Creating different profiles is a good way of having pre-defined operating parameters available for use in
various network environments. When the
Select a profile from the list. Select
selected, the mobile computer uses the authentication, encryption, ESSID, IP Config and power consumption
settings initially configured for that profile.
Editing a Profile
Select a profile from the list. Select
operating mode can be changed for the profile. Use the wizard to edit the profile power consumption and security
parameters. See Profile Editor Wizard on page 6-6 for procedure on using the wizard.
Creating a New Profile
Create new profiles from the
menu with only the
Select to display the
Add
set security, network address information and power consumption level for the new profile.
if the profile is already disabled.)
WLAN Profiles
from the pop-up menu to set that profile as the active profile. Once
Connect
from the pop-up menu to display the
Edit
window by performing a tap-and-hold anywhere in this window. A
Manage Profiles
highlighted displays.
Add
wherein the profile name and ESSID can be set. Use the
Profile Wizard
Description
window initially displays, existing profiles appear in the list.
Profile Wizard
menu
Disable
where the ESSID and
to
Profile Wizard