Showcod - Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual

NAME showcod - display Capacity on Demand (COD) configuration information
SYNOPSIS showcod [-v] [-d domain_id]
showcod -h
DESCRIPTION showcod(8) displays the COD information which includes the headroom amount,
number of installed COD Hardware Activation permits, the number of COD
permits reserved for domains, and the Chassis Hostid.
The showcod(8) command is not supported on the M3000 server.
When used without arguments this command displays the current COD
information.
You must have one of the following privileges to run this command:
Privileges
platadm, platop
domainadm, domainmgr, domainop
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-d domain_id
-h
-v
EXAMPLES
EXAMPLE 1
The output shown is what you would see if you had domainadm, domainop, or
domainmgr privileges for Domain 1.
EXAMPLE 2
Can execute the command for all domains.
Can execute the command only for accessible domains.
Displaying All COD Information

showcod

XSCF>
PROC Permits reserved for domain 1 : 0
Displaying All COD Information
Domain identifier. domain_id can be 0–23 depending on
system configuration.
Displays usage statement.
When used with other options or operands, an error
occurs.
Specifies verbose output.
showcod(8)
System Administration 341