Deletecodactivation - Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual

NAME deletecodactivation - remove a Capacity on Demand (COD) activation key from the
COD Hardware Activation database
SYNOPSIS deletecodactivation [-f] key-signature
deletecodactivation -h
DESCRIPTION The deletecodactivation(8) command removes the specified COD activation
key from the COD Hardware Activation database on the Service Processor.
This command is not available on the M3000 server.
Note – For details on COD keys, refer to the SPARC Enterprise M4000/M5000/
M8000/M9000 Servers Capacity on Demand (COD) User's Guide.
The system checks the number of COD permits against the number of COD CPUs
in use. If the permit removal will result in an insufficient number of COD permits
with respect to the CPUs in use, the system does not delete the key from the COD
Hardware Activation database. If you still want to delete the key, you must reduce
the number of COD CPUs in use. Power off the appropriate number of domains or
disconnect the appropriate number of the eXtended System Boards (XSBs).
You must have platadm privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-f
-h
The following operands are supported:
OPERANDS
key-signature
EXAMPLES
EXAMPLE 1
The following exit values are returned:
EXIT STATUS
0
>0
Forces the specified key to be deleted from the COD database.
Displays usage statement.
When used with other options or operands, an error occurs.
Deleting a key

deletecodactivation \

XSCF>
01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxxxxxxxxx
Successful completion.
An error occurred.
Specifies the key to be deleted from the COD database.
deletecodactivation(8)
System Administration 43