Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 247

group administrator
group operator
group custom
userdomain
defaultrole
timeout
server
Assign group name for up to five specified administrator
groups. The administrator group has platadm, useradm,
and auditadm privileges and you cannot change that.
Assign group name for up to five specified operator
groups. The operator group has platop and auditop
privileges and you cannot change that.
Assign group name and privileges for up to five groups.
Configure the user domain. See
important information.
Configure default privileges. If defaultrole is configured,
users have privileges as specified by defaultrole after
authentication; user group membership is not checked. If
defaultrole is not configured, users' privileges will be
learned from the LDAP/SSL server based on group
membership.
Configure transaction timeout, in seconds. seconds can be
1 to 20. The default is 4. If the specified timeout is too
brief for the configuration, the login process or retrieval
of user privilege settings could fail.
Configure the primary and up to five alternate LDAP/
SSL servers. To use a host name, DNS must be enabled.
An IP address can be specified with port number;
otherwise, the default port is used.
setldapssl(8)
, below, for
EXAMPLE 6
System Administration 223