Showad - Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual

NAME showad - show Active Directory configuration and messages
SYNOPSIS

showad

showad cert [-v] [-i n]
showad log [-M] [-C] [-S start_record_number] [-E end_record_number]
showad log -f
showad group administrator [-i n]
showad group operator [-i n]
showad group custom [-i n]
showad userdomain [-i n]
showad dnslocatorquery [-i n]
showad defaultrole
showad server [-i n]
showad -h
DESCRIPTION showad(8) displays Active Directory configuration and diagnostic messages.
You must have useradm privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
The following options are supported:
OPTIONS
-f
-h
-i n
-v
Displays diagnostic messages in real time. When this option is
used, the command does not terminate. Each diagnostic message
is displayed when it is registered. To stop the real-time display,
press Ctrl-C.
Displays usage statement. When used with other options or
operands, an error occurs.
Sets an index marker, value 1 - 5. When executed without -i, or
with -i and no value, showad walks sequentially through items
1 through 5. Exceptions: When used without -i, the command
showad cert displays the certificate information for the
Primary server, and showad server displays the Primary
server configuration.
Specifies verbose output. Used only with the cert operand to
display the full certificate.
showad(8)
System Administration 319