Shownameserver - Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual

NAME shownameserver - display the registered domain name system (DNS) servers and
the DNS search paths specified on the XSCF network
SYNOPSIS

shownameserver

shownameserver -h
DESCRIPTION shownameserver(8) command displays the registered DNS servers and the DNS
search paths in the XSCF network.
You must have one of the following privileges to run this command:
Privileges
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
-h
The setnameserver(8) command sets the DNS servers and the DNS search paths
EXTENDED
DESCRIPTION used in the XSCF network.
EXAMPLES
EXAMPLE 1
EXAMPLE 2
Displays usage statement.
Displays the DNS servers
XSCF network. The following example shows that three DNS servers and five
DNS search paths have been set:
shownameserver
XSCF>
nameserver 192.168.1.2
nameserver 10.18.108.10
nameserver 10.24.1.2
search example1.com
search example2.com
search example3.com
search example4.com
search example5.com
Displays the DNS servers
XSCF network. The following example shows that no DNS server
and the DNS search paths
and the DNS search paths
System Administration
shownameserver(8)
currently set for the
currently set for the
and the
445