Fujitsu SPARC ENTERPRISE M3000 Xscf Reference Manual page 440

showldapssl(8)
OPERANDS
EXAMPLES
416 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
Appends to end of output the number of records in the log.
-C
Specifies the last record number to display, where
-E
end_record_number can be any record number in the log. Use -C
to obtain the number of records in the log.
Displays text by page, like the more(1) command does.
-M
Specifies the first record to display, where start_record_number
-S
can be any record number in the log. Use -C to obtain the
number of records in the log.
The following operands are supported:
cert
log
group administrator
group operator
group custom
userdomain
usermap
defaultrole
server
Displays the current state of LDAP/SSL.
EXAMPLE 1
showldapssl
XSCF>
usermapmode: enabled
state: enabled
strictcertmode: enabled
timeout: 4
Displays certificate information for the Primary server.
EXAMPLE 2
showldapssl cert
XSCF>
Primary Server:
certstatus = certificate present
issuer = C=US, ST=California, L=San Diego, O=aCompany,
OU=System Group, CN=John User serial number = 0 (00000000)
subject = C=US, ST=California, L=San Diego, O=aCompany,
OU=System Group, CN=John User serial number = 0 (00000000)
Display current server certificates.
Display diagnostic messages.
Display current group configurations.
Display current group configurations.
Display current group configurations.
Display current userdomain settings.
Display current user mapping settings.
Display current defaultrole setting.
Display current LDAP/SSL server settings.