Troubleshooting
Not enough free space in flash memory for resources [52]
Try one or more of the following:
•
From the printer control panel, press
•
Delete fonts, macros, and other data stored in the flash memory.
From the printer control panel, navigate to:
> Settings >
Yes >
•
Use a larger‑capacity flash memory card.
Note: Downloaded fonts and macros that are not stored in the flash memory are deleted when the printer is turned
off or restarted.
PPDS font error [50]
Try one or more of the following:
•
From the printer control panel, press
•
If the printer cannot find the requested font, then navigate to:
> Settings >
The printer finds a similar font and reformats the affected text.
•
Cancel the current print job.
Paper changes needed
Try one or more of the following:
•
From the printer control panel, select Prompt for each page to continue printing.
•
Select Use current supplies to continue printing using the paper loaded in the tray.
•
Cancel the current print job.
Parallel port [x] disabled [56]
Do either of the following:
•
From the printer control panel, select Continue to clear the message and continue printing.
The printer discards any data received through the parallel port.
•
Select Reset active bin to reset the bin for a linked set of bins.
to clear the message and continue printing.
> Settings >
> Print Settings >
to clear the message and continue printing.
> Settings > Print Settings >
> Utilities Menu >
> PPDS menu >
> Best Fit >
182
> Format Flash >
>
> On >