Troubleshooting
PPDS font error [50]
Try one or more of the following:
•
From the printer control panel, press
•
If the printer cannot find the requested font, then navigate to:
> Settings >
The printer finds a similar font and reformats the affected text.
•
Cancel the current print job.
Paper changes needed
Try one or more of the following:
•
From the printer control panel, select Prompt for each page to continue printing.
•
Select Use current supplies to continue printing using the paper loaded in the tray.
•
Cancel the current print job.
Parallel port [x] disabled [56]
Do either of the following:
•
From the printer control panel, select Continue to clear the message and continue printing.
The printer discards any data received through the parallel port.
•
Select Reset active bin to reset the bin for a linked set of bins.
Printer restart. Check last job.
Press
on the printer control panel to clear the message and continue printing.
For more information, visit
Reattach bin [x]
Try one or more of the following:
•
Turn off the printer, and then turn it back on.
•
Reattach the specified bin.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the specified bin.
4
Reattach the bin.
5
Connect the power cord to a properly grounded electrical outlet.
6
Turn the printer back on.
to clear the message and continue printing.
> Settings > Print Settings >
www.dell.com/support/printers
> PPDS menu >
> Best Fit >
or contact technical support.
175
> On >