Moving The Printer - Dell B5460dn Mono Laser Printer User Manual

Maintaining the printer
3
Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge.
4
Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge.
5
Push the staple cartridge into the finisher until it clicks into place.
6
Close the stapler door.

Moving the printer

Before moving the printer
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or
printer damage:
• Turn off the printer, and then unplug the power cord from the electrical outlet.
•
Disconnect all cords and cables from the printer.
•
If two or more optional finishers are installed, then remove the finishers individually from the printer.
Notes:
–
Make sure to remove the topmost finisher first.
– To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.
1
1
2
1
146