Lcd - Panasonic AJ-HPD2500 Operating Instructions Manual

LCD

This menu is used for setting up the LCD monitor.
Item
FR SUPER
No. DISP.
0000
0001
900 LCD PROTECT
0000
0007
905 BRIGHT
0014
0000
0030
910 CONTRAST
0060
0000
0030
911 R CONTRAST
0060
0000
0030
912 G CONTRAST
0060
0000
0030
913 B CONTRAST
0060
Setting
FR SUPER
No. DISP.
OFF Sets LCD protect mode.
ON OFF: Protect mode is off.
ON: Protect mode is on.
NOTE:
• LCD output is turned off when the front panel is not used or video is not updated for
about 5 minutes.
• To cancel protect mode, press a front panel button, dial or start playback from the
controller. The operation that canceled LCD PROTECT mode will then take place.
–7 Adjusts the brightness of the LCD monitor.
| |
0
| |
7
–30 Adjusts the contrast of the LCD monitor.
| |
NOTE:
0
This setting multiplied by the R, G and B contrast settings (setup menus No. 911 (R
| |
CONTRAST), No. 912 (G CONTRAST), No. 913 (B CONTRAST)) makes the R, G and B
30
contrast setting.
–30 Adjusts the R (Red) contrast of the LCD monitor.
| |
NOTE:
0
This setting multiplied by the setting in setup menu No. 910 (CONTRAST) makes the
| |
contrast setting.
30
–30 Adjusts the G (Green) contrast of the LCD monitor.
| |
NOTE:
0
This setting multiplied by the setting in setup menu No. 910 (CONTRAST) makes the
| |
contrast setting.
30
–30 Adjusts the B (Blue) contrast of the LCD monitor.
| |
NOTE:
0
This setting multiplied by the setting in setup menu No. 910 (CONTRAST) makes the
| |
contrast setting.
30
• XX indicates factory default settings.
Settings and brief function description
191
Setup: Item Settings