Panasonic AJ-HPD2500 Operating Instructions Manual page 182

Item
FR SUPER
No. DISP.
511 DF MODE
512 TC OUT REF
513 VITC OUT
514 HD EMBD VITC
515 HD EMBD LTC
518 VITC GEN
519 UB OUT SEL
Definition of terms:
SBC (Sub Code Data) area:
VAUX (Video Auxiliary Data) area:
182
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 DF
59.94Hz
0001 NDF
Sets the DF or NDF mode for CTL and TCG.
0: Uses drop frame mode.
1: Uses non-drop frame mode.
0000 VOUT
59.94Hz
0001 TC_IN
Specifies how the phase is switched for the time code output by the TIME CODE OUT
connector for the external LTC input when the TC INT/EXT switch is set to EXT. (only in EE
mode)
0: Synchronized with output video signal.
1: Synchronized with the external time code input.
0000 SBC Specifies how to output VITC that will be superimposed on the SD output video signal.
0: Outputs the time code recorded in the SBC area as VITC
0001 VAUX
1: Outputs the time code recorded in the VAUX area as VITC
NOTE:
VITC data detected in the input video signal is automatically recorded in the VAUX area
during video recording.
0000 OFF Specifies whether or not VITC data will be superimposed on HD SDI output.
0001 ON 0: Not superimposed
1: Superimposed
0000 OFF Specifies whether or not LTC data will be superimposed on HD SDI output.
0001 ON 0: Not superimposed
1: Superimposed
0000 OFF
59.94Hz
0001 ON
Specifies whether or not the internal time code generator value should be recorded in the
VAUX area.
0: The internal time code generator value is not recorded.
Record the time code value when it is superimposed on input video signals.
1: The internal time code generator value is recorded.
NOTE:
When 23.98, 24, 29.97, 59-23, 60-24, 25, 60-25 is selected in menu No. 25 (SYSTEM
FREQ), the internal time code generator value is recorded as the time code in the VAUX
area.
0000 SBC
59.94Hz
0001 F_RATE
Selects user bits in the LTC data output by the TIME CODE OUT and HD SDI connectors
during playback of clips in 720/24PN, 720/30PN and 720/25PN formats as well as
optional AVC-Intra 1080/24PN, 30PN and 25PN clip formats.
0: Outputs the user bits recorded in the SBC area.
1: Outputs the frame rate information recorded in the VAUX area.
This area, which is separate from video and audio data area on a P2 card, stores SMPTE/
EBU compliant time code, recording dates and other information.
An area in the video data on a P2 card that stores additional information on video data.
Settings and brief function description
only
29.97Hz
50Hz 23.98Hz 24Hz
50Hz only
50Hz only
only
29.97Hz 25Hz