Video - Panasonic AJ-HPD2500 Operating Instructions Manual

VIDEO

This menu is used for video settings.
Item
FR SUPER
No. DISP.
0000
0001
0002
601 VIDEO INT SG
0003
0004
0000
0001
602 SDI IN MODE
0000
0001
0002
DOWNCON
620
MODE
0000
0001
0002
621 UPCONV MODE
0000
0001
626 D/C ENH H
0000
0001
627 D/C ENH V
0000
0001
0002
638 IN U/C MODE
Setting
FR SUPER
No. DISP.
100%CB Sets the internal signal type. SMPTE and ARIB signals are available in HD mode only
(black in SD mode).
75%CB
0: 100 % color bar
SMPTE
1: 75 % color bar
ARIB
2: SMPTE color bar
BLACK
3: ARIB color bar
4: Black
DR _ OFF
59.94Hz
DR_ON
60-25Hz
Specifies the method for processing HD SDI input. (Available only for DVCPRO HD)
0: Records the 8 higher bits after rounding up the two lowest bits.
1: Records the signal with 8 higher bits, obtained by dynamic rounding.
NOTE:
Records 8 high-order bit signals after rounding off the 2 low-order bits during SD SDI
input.
FIT_V
59.94Hz
FIT_H
60-25Hz
FIT_HV
Specifies the aspect ratio during down conversion.
0: Changes the ratio to adjust input size to output size as required by vertical axis. (The
aspect ratio stays the same.)
1: Changes the ratio to adjust input size to output size as required by horizontal axis. (The
aspect ratio stays the same.)
2: Changes the ratio to adjust input size to output size as required by horizontal and
vertical axis. (The aspect ratio may be distorted.)
FIT_V
59.94Hz
FIT_H
60-25Hz
FIT_HV
Specifies the aspect ratio during up conversion.
0: Changes the ratio to adjust input size to output size as required by vertical axis. (The
aspect ratio stays the same.)
1: Changes the ratio to adjust input size to output size as required by horizontal axis. (The
aspect ratio stays the same.)
2: Changes the ratio to adjust input size to output size as required by horizontal and
vertical axis. (The aspect ratio may be distorted.)
0dB
59.94Hz
+1dB
Specifies whether or not horizontal outlines be emphasized in down-conversion.
0: 0 dB
1: +1 dB
0dB
59.94Hz
+1dB
Specifies whether or not vertical outlines be emphasized in down-conversion.
0: 0 dB
1: +1 dB
FIT_V
59.94Hz
FIT_H
Selects aspect ratio for up-conversion recording.
FIT_HV
0: Side panel mode
1: Top and bottom are cropped
2: Stretch mode
• XX indicates factory default settings.
Settings and brief function description
50Hz 29.97Hz 59-23Hz
only
50Hz 23.98Hz 29.97Hz
only
50Hz 23.98Hz 29.97Hz
only
50Hz 29.97Hz 25Hz
50Hz 29.97Hz 25Hz
50Hz only
60-24Hz 25Hz
59-23Hz 25Hz
59-23Hz 25Hz
only
60-25Hz
60-25Hz only
Setup: Item Settings
183