Viewing Hard Disk Clip Information; Deleting Hard Disk Clips (Type S And Fat Formatted Hard Disks); Playing Back Audio And Video Of Hard Disk Clips For Confirmation - Panasonic AJ-HPD2500 Operating Instructions Manual

Viewing Hard Disk Clip Information

Use the steps below to view a variety of metadata on clips
stored on a hard disk. It shows information in the same way as
the P2 card clip property.
1
Move the cursor to a clip in the hard disk thumbnail
screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [PROPERTY] –
[CLIP PROPERTY] and press the SET button.
You can also use the PROP (SHIFT + TC PRESET) button.
➝For details, refer to "Viewing and Revising Clip
Information" (page 66). (But repairs cannot be made.)
Deleting Hard Disk Clips (TYPE S
and FAT Formatted Hard Disks)
Use the steps below to delete clips that are no longer
necessary on a hard disk.
1
Select a clip to delete in the hard disk thumbnail
screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [OPERATION] –
[DELETE] and press the SET button.
4
Select [YES] and press the SET button.
◆ NOTE:
• It may not be possible to delete clips with the
?
indicator) and (unknown clip indicator).
Playing Back Audio and Video of
Hard Disk Clips for Confirmation
1
Open the hard disk thumbnail screen.
2
Use the cursor buttons to select the clip you want to
view.
3
Press the PLAY button.
Playback starts from the clip at the cursor position. When
the clip is completely played back, the following clips are
played back. When the last clip is played back, the hard
disk thumbnail screen returns.
◆ NOTE:
• To play back a clip, it is not necessary to select it (so that the
thumbnail appears inside a blue frame).
• The thumbnail display settings can be changed to play back
only selected clips or play back only clips that contain text
memos.
• Pressing the SEARCH button instead of the PLAY button shows
a still of the first frame in the clip.
• A clip whose clip number is red cannot be played back.
• To rewind or fast forward, press the REW or FF button instead of
the PLAY button.
• Pressing the STOP button during clip playback stops playback
and reopens the thumbnail screen.
• When playback is stopped, the cursor moves to the clip played
prior to stopping.
• Video and audio playback may be disrupted between clips of
different formats (DVCPRO HD, DVCPRO50, DVCPRO, DV,
AVC-Intra50 and AVC-Intra100). This is normal and not a
malfunction.
• Text memos, metadata or other data cannot be added or
revised.
• To play back only the clip at the cursor location, hold down the
SHIFT button and press the PLAY button.
• Audio and video dropouts may occur during playback of some
hard disks. Use a high-speed hard disk drive preferably with an
eSATA connector to avoid dropouts during playback. A warning
X
(bad clip
(E-75) appears when video dropouts occur. Press STOP or
other button to close the warning.
Connections: Using This Unit With a Hard Disk
127