Table of Contents
Advertisement
Chapter 3
Using PJ-673 Utility
Before Using PJ-673 Series
Utility
With the AC adapter, connect the
printer to an AC power outlet.
Make sure that the printer driver has
been installed and is functional.
With the USB cable, connect the
printer to the computer running
®
Windows
, turn on the printer, and
then enter USB mode.
Starting PJ-673 Utility
In order to transfer utility settings to
the printer, a computer running
®
Windows
and a USB cable are
required.
PJ-673 Utility can only be used via a
USB connection. It cannot be used
via a wireless LAN connection.
To start PJ-673 Utility, click [Start] - [All
Programs] - [Brother PocketJet] - [Brother
PJ-673 Utility].
42
How to Use PJ-673 Utility
3
a
In the main window of the PJ-673 Utility,
select the check boxes of the
parameters with settings that can be
3
changed.
b
Select the desired settings from the
drop-down menus or enter the desired
values.
c
Click [Send Settings] to save the
settings in the printer.
NOTE
Some parameters can be adjusted using
both the printer driver's dialog box and
PJ-673 Utility. For the following
3
parameters, the setting specified in the
printer driver's dialog box has priority.
[Paper Size]
[Density] ([Print Density])
[Page Feed Mode]
[Dash Line Print]
Settings that are specified using the
printer driver are used during printing and
are saved until the printer is turned off.
When the printer is turned on again, the
settings specified using PJ-673 Utility are
used as the default settings.
3
Hide quick links:
Advertisement
Table of Contents
