Brother PJ673-K Manual page 49

3 Bottom Margin
The available settings differ depending on the
selected [Text Line Spacing] setting.
Text Line Spacing
[6 Lines/Inch]
[8 Lines/Inch (0.125")] or [8
Lines/Inch (0.12")]
Default setting: [Lines] (3)
The setting specified for this parameter takes
effect only when [Paper Size] is set to
[Custom].
The height of the bottom margin is expressed
in lines of text. For example, if [Bottom
Margin] is set to 6 lines, and if [Text Line
Spacing] is set to 6 lines per inch, the actual
height of the bottom margin is 1 inch
(25.4 mm).
Note that the minimum height of the bottom
margin must be at least 0.5 inches (12.7 mm).
For example, if [Text Line Spacing] is set to 6
lines per inch, [Bottom Margin] must be set to
at least 3 lines.
The maximum setting is the number of lines
determined by the [Form Length] setting – 1.
4 Text Line Spacing
Available settings: [6 Lines/Inch], [8
Lines/Inch (0.125")], [8 Lines/Inch (0.12")]
Default setting: [6 Lines/Inch]
This parameter determines the height of each
line of text. When [Extended Characters] is
set to [Graphics] in order to print graphic
characters, we recommend selecting [8
Lines/Inch (0.12")] because graphic
characters are 0.12 inches (3.1 mm) tall.
5 Left Margin
Available settings: [Use Paper Size],
[Columns] (number of columns can be
specified)
Default setting: [Use Paper Size]
 Use Paper Size - The default margins
determined by the paper size setting are
used, providing for 8 inches (203.2 mm) of
available print width.
 Columns - The left margin equals the
number of columns (specified here)
multiplied by the width of the number of
columns specified. The width of each
column is determined by the [Default
Lines
Pitch] setting. For example, if [Left Margin]
3-126
is set to 12, and [Default Pitch] is set to [12
characters/inch], the actual width of the
4-126
left margin is 1 inch (25.4 mm). Note that if
[Default Pitch] is set to [Proportional], 10
characters/inch is used for this calculation.
The maximum width of the left margin is 4.5
inches (114.3 mm).
6 Right Margin
Available settings: [Use Paper Size],
[Columns] (number of columns can be
specified)
Default setting: [Use Paper Size]
 Use Paper Size - The default margins
determined by the paper size setting are
used, providing for 8 inches (203.2 mm) of
available print width.
 Columns - The right margin equals the
number of columns (specified here)
multiplied by the width of the number of
columns specified. The width of each
column is determined by the [Default
Pitch] setting. For example, if [Right
Margin] is set to 12, and [Default Pitch] is
set to [12 characters/inch], the actual
width of the left margin is 1 inch (25.4 mm).
Note that if [Default Pitch] is set to
[Proportional], 10 characters/inch is used
for this calculation.
The maximum width of the right margin is a
setting that results in 0.2 inches (5.08 mm) of
printable page width (the space between the
left and right margins).
7 Default Pitch
Available settings: [10 characters/inch], [12
characters/inch], [15 characters/inch],
[Proportional]
Default setting: [12 characters/inch]
This parameter determines character width.
When 10, 12, or 15 characters/inch is selected,
each character is the same width. For
example, the letters "w" and "i" will be the same
width. When [Proportional] is selected,
character width varies by character. For
example, the letter "w" will be wider than the
letter "i". Note that the setting selected here
affects the width of the left and right margins.
Brother PJ-673 Utility
45
3