Brother PJ673-K Manual page 17

b
Select [Wireless Network
Connection], and then click [Next].
c
With the USB cable, connect the printer
to the computer running Windows
then turn on the printer in USB mode.
(As a factory default, the printer will be in
USB mode.) If the printer is in wireless
LAN mode (the WIRELESS LAN
indicator is blinking), switch it to USB
mode. For details, see Switching
Between Wireless LAN Mode and USB
Mode on page 30.
The next screen will automatically
appear.
d
The wireless LAN settings will appear in
the [WLAN Settings] screen. Type the
settings in the [WLAN Settings] screen,
and then click [Send Settings].
Make a note of the specified settings.
®
, and
NOTE
• The WEP key normally appears as shown
by A, regardless of the setting retrieved by
the printer at startup.
• When changing the WEP key, type in 5 or
13 ASCII characters or 10 or 26
hexadecimal characters. The WLAN
settings can later be changed with PJ-673
Utility on a computer running Windows
For details, see WLAN Settings
on page 51 in PJ-673 Utility Menu.
Setting Up the Printer
A
®
13
1
.