Brother PJ673-K Manual page 21

d
Click [Send Settings].
e
When the USB cable is disconnected,
the next screen automatically appears.
f
Click [Close].
The installation is now complete.
Continue by setting up the computer
running Windows
printer.
Setting Up the Computer Running
®
Windows
This procedure describes how to specify
settings for a wireless LAN connection. Since
the connection procedure differs depending
on the operating system, check the
procedure for your operating system. (As
examples, screens from Windows
used in the following procedures.)
Performing the procedure to Adding a Printer
will complete printing setup.
If wireless LAN is disabled on the computer
running Windows
A
Switch the printer to wireless LAN mode. To
enter wireless LAN mode, check that the
POWER indicator is lit, and then hold down
(at least 3 seconds) the
Check that the WIRELESS LAN indicator is
blinking. For details, see Switching Between
Wireless LAN Mode and USB Mode
on page 30.
a
Windows
Click [Control Panel] in [Apps] screen -
[Network and Internet].
Click [Network and Sharing Center].
Windows
From the [Start] menu, click [Control
Panel]-[Network and Internet].
Click [Network and Sharing Center].
Windows Vista
From the [Start] menu, click [Connect
to].
Windows
From the [Start] menu, click [Control
Panel]-[Network connection].
Right-click [Wireless Network
Connection], and then click [View
Available Wireless Networks].
Setting Up the Printer
®
and adding the
®
7 are
®
, enable it.
(Power) button.
®
8:
®
7:
®
:
®
XP:
1
1
17