Nikon Flash Units That Can Be Used - FujiFilm FinePix S1 Owner's Manual

Flash Photography - continued

Nikon Flash Units that Can Be Used

The table below shows the Nikon flash units that can be used with the FinePix
S1 Pro and the types of photography they can be used for. (Note that the built-
in flash and a Nikon flash unit cannot be used together.) This explanation
assumes that the lens mounted on the camera is a Nikkor lens with a built-in
CPU. (Lenses other than Nikkor lenses with a built-in CPU should not be
used.)
Available Photography
Modes
Flash Model
SB-28
SB-27
SB-26
SB-25
SB-24
SB-23
SB-21B (*2)
SB-22
SB-22s
SB-20
SB-16B
SB-15
SB-11 (*3)
SB-14 (*3)
SB-140 (visible
light)(*3)
A
: Usable
: Not usable
—
*1: If the exposure mode is set to Manual, simple TTL-BL flash control (
used.
*2: When the SB-21B is used, auto focus can only be used to take pictures when
the AF micro lens (60, 105, 200 or 70-180 mm) is mounted on the camera.
*3: If TTL mode is used with the SB-11, SB-14 or SB-140, the flash unit must be
connected using the Nikon SC-23 TTL flash control cord.
If these flash units are used in A mode or M mode, the Nikon Sensor Unit SU-2
is used with the SC-13 for the SB-11 and SB-14, and the Nikon Sensor Unit
SU-3 is used with the SC-13 for the SB-140. Alternatively, the SC-11 or SC-15
can be connected with the Nikon Sync Terminal Adapter AS-15.
For details, refer to the instructions provided with your flash unit.
If your Nikon flash unit has instructions which include a table of camera types
and it is capable of TTL mode, refer to the section for D group cameras.
78
TTL-BL flash Automatic
control external
(*1) flash control
A A
A A
A A
A A
A
—
A A
A A
Manual Multi-flash
A A
A
—
A A
A A
A
—
A
—
A
—
Slave flash
—
—
A
—
—
—
—
P.74) is