FujiFilm FinePix S1 Owner's Manual page 94

DPOF Settings - continued
3
Press function button [1] or [3] to specify the number of
prints for the image.
• Press function button [1] to increase the number of prints and function
button [3] to decrease the number of prints.
To specify trimming (steps 4 to 5)
4 Press "
settings screen appears. Press "
button to further enlarge the image.
• Press "
original size.
• Press "
image.
• Press the "CANCEL" button to return to normal image display.
5 If you want to trim another part of the image, press the
"PLAY" button to display the cursor and then use "
b
" ", "
the part of the image you want to trim.
• The table below lists the magnifications at which trimming can be
performed.
Image Size
3040
2304
1440
94
a
" on the 4-direction button. The trimming
b " on the 4-direction button to return the enlarged image to its
d c
" or " " on the 4-direction button to display (play back) another
d c
" and " " on the 4-direction button to display
Magnification
2016 4.52
1536 3.6
960 2.14
a
" on the 4-direction
a
",