FujiFilm FinePix S1 Owner's Manual page 125

Problem
The playback image
is too dark even
though I used the
flash.
The playback image
is blurred.
I cannot format the
SmartMedia or
Microdrive.
I cannot erase all the
frames.
Nothing happens
when I use the
camera switches and
dials.
No image appears on
the color LCD
monitor when I press
the "PLAY" button.
There is no image on
the TV screen.
Cause
• The subject is too far away.
• Something is obstructing the
flash.
• The lens is dirty.
• The camera is not focused.
• The SmartMedia or Microdrive
is write-protected.
• The media is damaged.
• The frame is protected.
• Camera malfunction.
• The batteries are flat.
• There is no media loaded.
• There is no photography data
recorded on the media.
• The camera and TV are not
connected correctly.
Solution
• Move closer to the subject.
• Remove the lens hood.
• Clean the lens.
• Focus the camera correctly
( P.28).
• Remove the write-protection.
(Peel off the write-protect
sticker.)
• Use a new media.
• Remove the frame protection.
• Remove the power supply (the
batteries) and then reload them
and try again.
• Fit new batteries.
• Insert a media that contains
some photography data.
• Connect the camera and TV
correctly.
• Set the TV input to "VIDEO".
5
125