Cleaning the CCD - continued
Cleaning the CCD
1
Perform steps 1 to 5 in "Determining whether cleaning
is required" to swing the mirror up.
• Never disconnect the AC power adapter during cleaning as this can result
in damage to the camera shutter.
2
Use a blower to remove any soiling on the CCD surface.
Note
Points to Note when Cleaning the CCD
• Use a blower that does not have a brush attached. Using a blower brush to
clean soiling from the CCD can scratch the CCD surface.
• If there is soiling on the CCD that cannot be removed using a blower, such as
oil or fingermarks, take the camera to an authorized FUJIFILM dealer for
cleaning. Never attempt to clean the CCD by wiping it as the CCD is
extremely fragile.
3
Check that all the soiling has been removed and then
hold down both the self-timer button "!" and the AE
lock button "AE-L" as you switch the camera off. Then
disconnect the AC power adapter from the camera.
• When you switch the camera off, the mirror drops down and the shutter
closes at the same time. Ensure that your fingers are not caught inside
the camera.
116