Naming A User Song - Yamaha DTX Drums DTX502 Owner's Manual

Naming a User Song

Using the following procedure, you can freely assign a name to the User song you have recorded.
1.
Press the [SAVE/ENTER] button on the SONG1 page.
The button will start to flash and the following page will be displayed.
2.
Change the displayed name as required.
Press the [<]/[>] buttons to move the cursor to the character you wish to change, and
then turn the Data Dial to change it.
3.
Press the [SAVE/ENTER] button once again.
To cancel the process without changing the song name, press the [
4.
Press the [SAVE/ENTER] button to save the new song
name.
SONG saVe name
:[Untitled]
SONG saVe name
:[tntitled]
SONG saVe name
Are you sure?
] button.
Basic Techniques
Recording Your Performances
NOTE
• Preset songs cannot be renamed.
• Songs containing no data (i.e.,
"EmptySng") cannot be renamed.
DTX502 Owner's Manual
53