Storing A Customized Click Set - Yamaha DTX Drums DTX502 Owner's Manual

Basic Techniques

Storing a Customized Click Set

After you have customized a click set (as described on pages 32 through 36), you should store
it to prevent your settings being lost when the DTX502 is turned off.
1.
Press the [SAVE/ENTER] button.
The button will start to flash and the following page will be displayed.
2.
Turn the Data Dial to select the click set (1 to 30) in
which you wish to store your settings.
3.
If necessary, name your new click set.
Press the [<]/[>] buttons to move the cursor to the character you wish to change, and
then turn the Data Dial to change it.
4.
Press the [SAVE/ENTER] button once again.
To cancel the process without storing any settings, press the [
5.
Press the [SAVE/ENTER] button to store your settings.
CLK saVe to 01
:[User ]
CLK saVe to 01
:[tser ]
CLK saVe to 01
Are you sure?
] button.
NOTICE
When you store new settings to
a click set, its current settings
will be overwritten. Before pro-
ceeding, therefore, you should
ensure that the click set in
question contains no irreplace-
able settings.
DTX502 Owner's Manual
37