Kitv3 Volume; Kitv4 Tuning; Kitv5 Stereo Panning; Kitv6 Decay - Yamaha DTX Drums DTX502 Owner's Manual

e Voice Number: Voice Name
Use the Voice Number parameter to choose a voice from the
selected category.
The number of available voices varies
depending on the selected category. For
Settings
details on the voices in each, refer to the
Voice List (page 85).
NOTE
When "00:NoAssign" is selected as the voice, the layer in ques-
tion will not produce any sound.
Volume
KitV3
>KitV3 snareHd˙
" Volume=127
q Trigger input source
See q Trigger input source from the description of the KitV2
page.
w Volume
Use this parameter to set the volume of the voice assigned to
the selected layer.
Settings
0 to 127
Tuning
KitV4
>KitV4 snareHd˙
" tune=+ 0.0
q Trigger input source
See q Trigger input source from the description of the KitV2
page.
w Tune
Use this parameter to set the tuning of the voice assigned to
the selected layer.
Settings
–24.0 to +24.0 (in 10-cent steps)
NOTE
This setting has no effect when Pad Song ( e ) is selected as the
voice category.
q
‚
w
q
‚
w
Setting Parameters using Menu Mode
Stereo Panning
KitV5
>KitV5 snareHd˙
" Pan= C
q Trigger input source
See q Trigger input source from the description of the KitV2
page.
w Pan
Use this parameter to set the stereo panning of the voice
assigned to the selected layer.
Settings
L64 to C to R63
Decay
KitV6
>KitV6 snareHd˙
" Decay=+ 0
q Trigger input source
See q Trigger input source from the description of the KitV2
page.
w Decay
The amount of time it takes a voice to fade away to silence is
referred to as its "decay". Use this parameter to set the decay
for the voice assigned to the selected layer. Positive values
produce shorter decay times and crisper sounds.
Settings
–64 to 0 to +63
Cutoff Frequency
KitV7
>KitV7 snareHd˙
"CutOffFreq=+ 0‚
q Trigger input source
See q Trigger input source from the description of the KitV2
page.
w CutOffFreq
Use this parameter to set the filter cutoff frequency for the
voice assigned to the selected layer. Negative values produce
darker sounds and vice-versa.
Settings
–64 to 0 to +63
Advanced Techniques
q
‚
w
q
‚
w
q
w
DTX502 Owner's Manual
59