Using The Metronome; Starting & Stopping; Adjusting The Tempo; Setting The Overall Volume - Yamaha DTX Drums DTX502 Owner's Manual

Basic Techniques

Using the Metronome

Playing your electronic drum kit along with the built-in metronome is a great way to perfect
your rhythm.
Starting & Stopping
Press the [ ] button to start the metronome.
• The red metronome light (left) flashes on the start of each measure; the green light (right)
flashes on every other beat.
• The current metronome tempo is shown by the number display.
Flashes red
Press the [ ] button once again to stop the metronome.

Adjusting the Tempo

Hold down the [SHIFT] button and turn the Data Dial.

Setting the Overall Volume

Hold down the [
or [–] button.
You can set the overall metronome volume between "0" (off) and "16" (loudest).
Hold
Flashes green
Hold
] button and press either the VOLUME [+]
aClickVolume=10b
cÇÇÇÇÇÇÇÇÇÇÇÇÇÇd
NOTE
The overall volume setting applies to
all click sets.
DTX502 Owner's Manual
31