Yamaha DTX502 Firmware Update Manual

Hide thumbs Also See for DTX502:

Download this manual

Thank you for choosing a Yamaha product.

This document explains how to update the firmware of the DTX502 and the update history.

For details of the major new functions and operations, refer to DTX502-related documents on the following

website:

h t t p : / /dow nl oa d .y a mah a .c o m

■Special Notices

This updater is designed for use with the DTX502, earlier than version 1.30.

・

This updater is to be used at the user's own risk.

・

A computer running one of the following operating systems is required for this update:

Windows7 32bit/64bit、Windows8.1 32bit/64bit、Windows 10 32bit/64bit

・

The update will take several minutes. Please ensure that your computer does not enter Sleep mode

during this time.

・

During the update, do not launch or operate any applications other than the updater on your computer.

・

DO NOT power off or disconnect the cable from the product during the updating process. The DTX502

may become inoperable.

・

If the update fails, and the DTX502 still does not operate correctly even after you execute the update

once again, please contact your Yamaha dealer.

・

The company names and product names in this document are the trademarks or registered trademarks

of their respective companies.

DTX502

Firmware Update Guide

DTX502 Firmware Update Guide

Page 1 DO NOT power off or disconnect the cable from the product during the updating process. The DTX502 may become inoperable. ・ If the update fails, and the DTX502 still does not operate correctly even after you execute the update once again, please contact your Yamaha dealer. ・...
Page 2 ] (Standby/On) switch. If the version shown on the display is 1.30 or later, you do not need to use this updater. If the version shown is earlier than 1.30, proceed with updating as described in “Updating Procedure.” DTX502 Firmware Update Guide...
Page 3 (DTX502 updater) Press the [ ] (Standby/On) switch and turn off the DTX502. Connect the DTX502 to the computer by using a USB cable. While holding down the [ ] button, press the [ ] (Standby/On) switch and turn the DTX502 back on.
Page 4 Fine tuned the sensitivity parameters for Trigger input jacks ⑩, ⑪, and ⑫ input. ・ Manual Development Group ©2016 Yamaha Corporation P u b l i s h e d 0 7 / 2 0 1 6 Y J - A 0 DTX502 Firmware Update Guide...