Setting The Tempo; Setting The Time Signature; Setting The Timer - Yamaha DTX Drums DTX502 Owner's Manual

CLK1

Setting the Tempo

1.
Move the cursor to the number to the right of the "
symbol using the [<]/[>] buttons.
2.
Turn the Data Dial to change the tempo setting.
The tempo can be freely set between 30 and 300 BPM.
CLK1

Setting the Time Signature

1.
Move the cursor to the time signature display using the
[<]/[>] buttons.
2.
Turn the Data Dial to set the time signature.
The available time signature settings are 1/4 to 16/4, 1/8 to 16/8, and 1/16 to 16/16.
CLK1

Setting the Timer

By setting the metronome's timer, you can have it turn off automatically after the set time has
elapsed.
1.
Move the cursor to the "
buttons.
∫
The " " symbol will be replaced by a number.
2.
Turn the Data Dial to set the metronome timer.
The time can be freely set between 0 seconds (i.e., the timer is disabled) and 600 sec-
onds in units of 30 seconds.
∫
" symbol using the [<]/[>]
Basic Techniques
Customizing the Metronome
⁄=
"
NOTE
• If you hold down the [SHIFT] button
and turn the Data Dial, you can
change the tempo without having to
move the cursor to the number to
⁄=
the right of the "
• You can also use the Tap Tempo
function (page 36) to set the tempo
by striking pads.
NOTE
• The metronome timer setting
applies to all click sets.
• The metronome timer does not
operate when in Training Mode.
DTX502 Owner's Manual
" symbol.
33