Display Assembly - HP Pavilion m7-1000 Maintenance And Service Manual

Display assembly

NOTE: The display assembly spare part kit includes display panel cable, 2 WLAN antenna
transceivers and cables, and webcamera/microphone module and cable.
Description
For use on all computer models:
17.3-in, FHD, AntiGlare display assembly for use only on computer models equipped with a
graphics subsystem with UMA memory
17.3-in, HD, BrightView display assembly for use only on computer models equipped with a
graphics subsystem with UMA memory
For use only with computer models equipped with an Intel processor:
17.3-in, FHD, AntiGlare display assembly for use only on computer models equipped with a
graphics subsystem with discrete memory
17.3-in, HD, BrightView display assembly for use only on computer models equipped with a
graphics subsystem with discrete memory
Before removing the display assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the hard drive (see
6. Remove the optical drive (see
7. Disconnect the wireless antenna cables from the WLAN module (see
8. Remove the keyboard (see
9. Remove the top cover (see
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
2. Release the display panel cable (2) from the heat sink. (The display panel cable is attached to
the heat sink with double-sided tape.)
3. Disconnect the display speakers cable (3) from the system board.
88 Chapter 4 Removal and replacement procedures
Battery on page 45).
Hard drive on page
Optical drive on page
Keyboard on page 57).
Top cover on page 61).
46).
51).
WLAN module on page
Spare part number
681979-001
681978-001
682228-001
682227-001
55).