3.
Lift the processor (3) straight up, and remove it.
NOTE:
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Card Reader board
Description
Card Reader board (includes cable)
Before removing the Card Reader board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
e.
System board (see
The gold triangle (4) on the processor must be aligned with the triangle icon embossed
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Top cover on page
System board on page
45), and then remove the following components:
46)
51)
57)
61)
73)
Component replacement procedures
Spare part number
681988-001
83