Fingerprint Reader Board - HP Pavilion m7-1000 Maintenance And Service Manual

4. Remove the power button board (3) and cable.
Reverse this procedure to install the power button board.

Fingerprint reader board

Description
Fingerprint reader board (includes cable and bracket)
Before removing the fingerprint reader board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
66 Chapter 4 Removal and replacement procedures
Battery on page 45), and then remove the following components:
Hard drive on page 46)
Optical drive on page
Keyboard on page 57)
Top cover on page 61)
51)
Spare part number
681975-001