Table of Contents
Advertisement
2.
Remove the speakers (2).
Reverse this procedure to install the speakers.
Display assembly
Description
14.0-in, high definition (HD), light-emitting diode (LED), BrightView SVA display assembly (includes microphone and wireless
antenna transceivers and cables):
In espresso black finish
In Pacific blue finish
In ruby red finish
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
WLAN module (see
b.
WWAN module (see
90
Chapter 4 Removal and replacement procedures
Battery on page
41), and then remove the following components:
WLAN module on page
WWAN module on page
44)
47)
Spare part number
650463-001
650465-001
650467-001
Advertisement
Table of Contents
