To Install A Xircom Ethernet 10/100 + Modem Pc Card - HP OmniBook 3000 - Notebook PC Manual

A dialog box displays Windows 95 Can't Find The Necessary Driver.
4. Even though the disk may still be in drive A, enter A:\ when the path dialog box
appears, then click OK.
5. Enter a Workgroup if applicable.
6. When prompted to restart the computer, remove the disk, then click Yes.

To install a Xircom Ethernet 10/100 + Modem PC Card

Requirements
OmniBook 3000 with Windows 95 installed.
Xircom Ethernet 10/100 + Modem PC Card.
Xircom Ethernet 10/100 + Modem PC Card Installation Disk.
Windows 95A
1. While Windows 95 is running, insert the PC Card.
The New Hardware Found window is displayed.
2. When prompted, insert the Xircom installation disk, then click OK.
3. Enter the appropriate modem information, then click OK.
4. Enter a Workgroup if applicable.
5. Insert the Windows 95 CD-ROM when prompted and enter the path D\WIN95 or
enter C:\WINDOWS\OPTIONS\CABS, then click OK.
6. Remove the disk, then click Yes to restart.
7. Enter your network settings and restart.
Your Xircom Ethernet 10/100 + Modem PC Card is now ready for use.
Windows 95B OEM Service Release 2
1. While Windows 95 is running, insert the PC Card.
The New Hardware Found window is displayed.
2. When prompted, insert the Xircom Installation disk, then click Next.
3. Click Finish to install the drivers.
4. Enter a Workgroup if applicable.
Using Windows 95
Installing Cards
3-15