Using Windows Nt - HP OmniBook 3000 - Notebook PC Manual

Using Windows NT 4.0

The following procedure installs a retail version of Windows NT 4.0, and configures
appropriate device drivers.
Requirements
OmniBook 3000.
OmniBook 3000 internal CD-ROM drive.
Blank floppy disk.
16 MB of RAM (32 MB recommended).
Windows NT 4.0 Installation CD-ROM.
OmniBook 3000 drivers Windows NT 4.0.
Location: OmniBook hard drive and on the Recovery CD in
\OMNIBOOK\DRIVERS\NT40.
4-2