To Install The Touchpad Drivers (Synaptics); To Install The Wired 10/100 Lan Drivers (Realtek); To Install The Wireless Lan Drivers (Actiontec) - HP OmniBook vt6200 - Notebook PC Manual

Installing Windows XP
Installing Retail Windows XP
Upon successful installation of the drivers, you will be asked to reboot your notebook.
Choose YES, I WANT TO RESTART MY COMPUTER NOW if you have no other
drivers to install. Otherwise, choose NO, I WILL RESTART MY COMPUTER LATER
and continue to the next step.

To install the touchpad drivers (Synaptics)

While the touchpad will function with the default XP touchpad drivers, you will lack the
ability to use special features and advanced configuration settings. Hewlett-Packard
suggests that you install these drivers to take advantage of these features. This driver
works for all systems, including notebooks that have both the touchpad and touchstyk.
1. Run SETUP.EXE from the touchpad driver directory on the Recovery CD.
2. Choose the desired language and click OK.
3. Follow the remaining on-screen instructions to complete installation.
Upon successful installation of the drivers, you will be asked to reboot your notebook.
Choose YES, I WANT TO RESTART MY COMPUTER NOW if you have no other
drivers to install. Otherwise, choose NO, I WILL RESTART MY COMPUTER LATER
and continue to the next step.

To install the wired 10/100 LAN drivers (RealTek)

While the RealTek LAN will function with the default XP LAN drivers, you will lack the
ability to use special features and advanced configuration. Hewlett-Packard suggests that
you install these drivers to take advantage of these features.
1. Run SETUP.EXE from the LAN driver directory on the Recovery CD.
2. Follow the remaining on-screen instructions to complete installation.

To install the wireless LAN drivers (Actiontec)

Windows XP does not contain the necessary drivers for the wireless LAN hardware that
may be in your notebook (not all HP Notebooks are equipped with wireless LAN). To
enable wireless LAN, you must install the drivers that are provided on the Recovery CD.
1. Run SETUP.EXE from the wireless driver directory on the Recovery CD.
102 Corporate Evaluator's Guide