HP OmniBook 3000 - Notebook PC Manual page 79

10. Select the Protocols to install, then click Next.
11. Click Next to install the default Windows NT networking services.
12. Click Next to install the networking components.
13. Enter the directory of the Windows NT install files, then click Continue. (If you
installed from CD-ROM they are in d:\I386\.)
14. Enter the directory of the Xircom Windows NT drivers (A:\), then click OK.
15. Enter the settings listed above in the Setup window, then click Continue.
16. If you installed the TCP/IP protocol you will be asked if you wish to use DHCP.
Select the appropriate choice for your network.
17. If you chose not to use DHCP you will be prompted to enter your TCP/IP
information.
18. Click Next to choose the default network bindings.
19. Click Next to start the network.
20. Select whether you are connecting to a workgroup or a domain and enter the
appropriate name for your network, then click Next.
21. Click Finish, then click Yes to restart your computer.
Using Phoenix CardExecutive
Follow these steps if the Phoenix CardExecutive is installed.
1. Start Windows NT 4.0
2. Insert the PC Card.
3. Click OK to accept the PC Card configuration.
4. Follow the instructions for standard Windows NT 4.0 PC Card support above to
add Network support.
Using Windows NT 4.0
Installing Cards
4-15