Accounting Manager Basic Procedures; Configuring Unit Costs In Accounting Manager - Canon imagePROGRAF iPF650 User Manual

Status Bar
Displays messages and other information.

Accounting Manager Basic Procedures

The first time you use the Accounting Manager, use the following procedures to configure the settings.
1.
Configure unit costs, including the costs of ink and paper.
For details of the unit cost settings, see Configuring Unit Costs in Accounting Manager
2.
Set options such as the units displayed.
For details of the unit settings, see Configuring Units and Display Settings in Accounting Manager
3.
If you are using Regular Data Acquisition, configure the Regular Data Acquisition settings.
For details of the Regular Data Acquisition settings, see Automatically Acquiring Print Job Logs at Regular Inter-
vals .
→P.396
4.
Specify the jobs to be listed.
For details of how to select the job logs displayed, see Switching Between Displaying Jobs on Printer and Regu-
larly Acquired Jobs
This displays the required print job logs and lists the details.

Configuring Unit Costs in Accounting Manager

Select Unit Costs in the Settings menu to open the Unit Costs dialog box. Configure the unit cost settings in this dialog
box.
Note
• When you select a job and then open the Unit Costs dialog box, items with unit costs that have not yet been
configured for that job are shown highlighted.
• Setting the Unit Cost for Ink
• Setting the Unit Cost for Paper
• Setting the Unit Cost for Items Other Than Ink and Paper
iPF650
.
→P.396
→P.392
→P.393
Windows Software
→P.394
Accounting Manager Basic Procedures
> Accounting >
.
→P.391
.
→P.395
4
391