Canon imagePROGRAF iPF650 User Manual page 747

Compatible printheads
For information on compatible printheads, see "Printhead."
Precautions when handling the Printhead
Take the following precautions when handling the Printhead.
Caution
• For safety, keep the Printhead out of the reach of children.
• If ink is accidentally ingested, contact a physician immediately.
• Do not touch the Printhead immediately after printing. The Printhead becomes extremely hot, and there is a
risk of burns.
Important
• There may be ink around the nozzles of the Printhead you remove. Handle the Printhead carefully during
replacement. The ink may stain clothing.
• Do not open the Printhead pouch until immediately before installation. After removing the Printhead from
the pouch, install it right away. If the Printhead is left after the pouch is opened, the nozzles may dry out,
which may affect printing quality.
Access the menu for Printhead replacement
Caution
• When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The metal
parts of the Printhead become hot during printing, and there is a risk of burns from touching these parts.
Note
• Prepare a new Ink Tank when ink levels are low.
• Your hands may become dirty during Printhead replacement. Use the gloves provided with the new Printhead
for replacement.
1.
If the roll is not ejected because of the cutting method selected, cut it manually and remove it. (See "Cutting Roll
Paper After Printing.")
2.
Clean inside the Top Cover. (See "Cleaning Inside the Top Cover.")
3.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
Note
• If the Tab Selection screen is not displayed, press the Menu button.
4.
Press the OK button.
The Set./Adj. Menu is displayed.
iPF650
→P.728
→P.195
Maintenance
→P.744
Replacing the Printhead
> Printheads >
10
).
731