Changing The Type Of Paper - Canon imagePROGRAF iPF650 User Manual

Large-format printers
Hide thumbs Also See for imagePROGRAF iPF650:
Table of Contents

Advertisement

Manag-
eRemain-
Barcodes
Roll
On
Not prin-
ted
Note
• For details on types of paper to select, see the Paper Reference Guide. (See "Types of Paper.")
→P.562
8.
Holding it at the positions indicated, close the Roll Cover.
Note
• Cut the edge of the roll after the paper is advanced if it is soiled or if there are cuts from scissors or
the blade after removing creased edges. (See "Specifying the Cutting Method for Rolls.")

Changing the Type of Paper

Follow these steps to change the type of paper specified on the printer after you have loaded paper.
If you will continue using this type of paper later, selecting Keep Paper Type > On will save the time and effort of config-
uring the media type setting when you load the paper again. The current media type settings before you select On will be
automatically selected at that time. (See "Using the Same Type of Paper Regularly.")
Important
• For best printing results, the printer fine-tunes the feed amount for each type of paper. Be sure to select the
type of paper to use correctly before printing.
• Because the printer fine-tunes the feed amount for each type of paper, the margins and the size of printed
images may vary depending on the type of paper used. If margins and the size of images are not as you ex-
pected, adjust the paper feed amount.
(See "Adjusting the Feed Amount.")
Changing the Type of Paper
Note
• After you load a roll, the printer automatically shows a menu for selection of the type of paper on the Display
Screen. Select the type of paper and press the OK button.
If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll
length after the type of paper. (See "Specifying the Paper Length.")
iPF650
Printer Operation After the Paper is Fed
A menu for selection of the paper type and length is automatically shown on the Display
Screen.
Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.
→P.615
Handling Paper
>
Handling rolls
→P.576
→P.577
Changing the Type of Paper
>
6
→P.586
575

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf750

Table of Contents